Back to MSDS Online

OR CLEANER 2

1. === Product Identification ===

Synonyms: Parts cleaner
CAS No.: Not applicable for mixture
Molecular Weight: Not available
Chemical Formula:
Not applicable for mixture
2. === Composition/Information on Ingredients ===

Ingredient
CAS No Percent Hazardous
Phosphoric Acid 7664-38-2 2.0 Yes
Nonylphenol Ethoxylate Not available 0.5 Yes
Deionized Water 7732-18-5 97.5 No


3. === Hazards Identification ===

CAUTION! CAUSES IRRITATION TO EVERY AREA OF CONTACT. HARMFUL IF SWALLOWED.

Potential Health Effects
----------------------------------

Inhalation:
Inhalation is not an expected hazard unless misted or heated to high temperatures. Mist or vapor inhalation can cause irritation to the nose, throat, and upper respiratory tract. Severe exposures can lead to a chemical pneumonitis.
Ingestion:
Corrosive. May cause sore throat, abdominal pain, nausea, and severe burns of the mouth, throat, and stomach. Severe exposures can lead to shock, circulatory collapse, and death.
Skin Contact:
May cause mild irritation and or redness of the skin.
Eye Contact:
May cause irritation. May cause redness, pain, blurred vision, eye burns, and permanent eye damage.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
Persons with pre-existing skin disorders or eye problems, or impaired respiratory function may be more susceptible to the effects of the substance.


4. ===First Aid Measures ===

Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately.
Ingestion:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Eye Contact:Immediately flush eyes with gentle but large stream of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Call a physician immediately.


5. === Fire Fighting Measures ===

Fire:
Not considered to be a fire hazard.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire. Water spray may be used to keep fire exposed containers cool.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.


6. === Accidental Release Measures ===

Absorb spill with inert material. Flush area well with water to remove trace residue.


7. === Handling and Storage ===

Store in cool, dry area. Keep from freezing. Keep container closed when not in use. Keep out of reach of chi


8. === Exposure Controls /Personal Protection ===

Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits.
Personal Respirators (NIOSH Approved):
No special requiremnets are needed for this material.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety glasses, goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.


9. === Physical/Chemical Properties ===

Appearance:
Purple Clear liquid.
Odor:
Odorless.
Solubility:
Miscible in all proportions in water.
Specific Gravity:
Not available.
pH:
3
% Volatiles by volume @ 21C (70F):
Not available.
Boiling Point:
Not available.
Melting Point:
Not available.
Vapor Density (Air=1):
Not available.
Vapor Pressure (mm Hg):
Not available.
Evaporation Rate (BuAc=1):
Not available.


10. === Stability and Reactivity Data ===

Stability:
Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Not available.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Caustics
Conditions to Avoid:
High temperature may increase the risk of damaging metal parts.


11. === Toxicological Information ===

No data available


12. === Ecological Information ===

No data available


13. === Disposal Considerations ===

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.


14. === MSDS Transport Information ===

Non D.O.T Regulated.


15. === Regulatory Information ===

Not available at this time.


16. === Other Information ===


High Valley Products, Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

HIGH VALLEY PRODUCTS, INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, HIGH VALLEY PRODUCTS, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.

Revision Date 2/23/11