Back to MSDS Online

H-10 Antifoam

1. === Product Identification ===

Synonyms: None
CAS No.: Not applicable.
Molecular Weight: Not applicable. ORGANISILICONE FLUID
Chemical Formula: Not applicable.
2. === Composition/Information on Ingredients ===

Ingredient
CAS No Percent Hazardous
Organisilicone Fluid NA 10% No
De-ionized Water 7732-18-5 90% No


3. === Hazards Identification ===

Emergency Overview
--------------------------
CAUTION! MAY CAUSE EYE IRRITATION.

-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 1 - Slight
Reactivity Rating: 0 - None
Contact Rating: 1 - Slight
Lab Protective Equip: GOGGLES; LAB COAT
Storage Color Code: Orange (General Storage)
-----------------------------------------------------------------------------------------------------------

Potential Health Effects
----------------------------------

Inhalation:
No adverse health effects via inhalation.
Ingestion:
No adverse effects expected. May cause mild irritation to the gastrointestinal tract.
Skin Contact:
Not expected to be a health hazard from skin exposure.
Eye Contact:
Direct eye contact may cause temporary discomfort with mild redness and dryness similar to windburn.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
No information found.


4. ===First Aid Measures ===

Inhalation:
Not expected to require first aid measures. Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion:
Not expected to require first aid measures. If large amounts were swallowed, give water to drink and get medical advice.
Skin Contact:
Not expected to require first aid measures. Wash thoroughly with running water. Get medical advice if irritation develops.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.


5. === Fire Fighting Measures ===

Fire:
Flash point: > 101.1C (> 214F) CC
Not considered to be a fire hazard.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Dry chemical, foam, water or carbon dioxide.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.


6. === Accidental Release Measures ===

Caution! Floor and other surfaces may be slippery. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert material (e. g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust. Do not flush to sewer!


7. === Handling and Storage ===

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.


8. === Exposure Controls /Personal Protection ===

Airborne Exposure Limits:
None established.
Ventilation System:
In general, dilution ventilation is a satisfactory health hazard control for this substance. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved):
Not expected to require personal respirator usage.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.


9. === Physical/Chemical Properties ===

Appearance:
White liquid.
Odor:
Light odor.
Solubility:
Negligible.
Specific Gravity:
1.00 @ 25C
pH:
No information found.
% Volatiles by volume @ 21C (70F):
100
Boiling Point:
100C (212F)
Melting Point:
No information found.
Vapor Density (Air=1):
Not applicable.
Vapor Pressure (mm Hg):
30 @ 20C (68F)
Evaporation Rate (BuAc=1):
No information found.


10. === Stability and Reactivity Data ===

Stability:
Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Silicon dioxide, carbon oxides, and formaldehyde.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Strong oxidizers.
Conditions to Avoid:
Incompatibles.


11. === Toxicological Information ===

No information available


12. === Ecological Information ===

Environmental Toxicity:
No information found.


13. === Disposal Considerations ===

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.


14. === MSDS Transport Information ===

Not regulated.


15. === Regulatory Information ===

No information available.


16. === Other Information ===

NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0
Label Hazard Warning:
CAUTION! MAY CAUSE EYE IRRITATION.
Label Precautions:
Avoid contact with eyes.
Wash thoroughly after handling.
Label First Aid:
In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists.
Product Use:
Laboratory Reagent.


High Valley Products, Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

HIGH VALLEY PRODUCTS, INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, HIGH VALLEY PRODUCTS, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.

Revision Date 10/06